SCC (Smart Cruise Control) (if equipped)
Limitations Details
Changing lanes
OMV073158L
1 Your vehicle,
2 Lane changing vehicle
When a vehicle (2) moves into your lane from
an adjacent lane, it cannot be detected by the
sensor until it is in the sensor's detection range.
Smart Cruise Control may not immediately
detect the vehicle when the vehicle changes
lanes abruptly. In this case, you must maintain
a safe braking distance, and if necessary,
depress the brake pedal to reduce your driving
speed in order to maintain a safe distance.
Detecting a vehicle
OMV073237L
OMV073160L_2
In the following cases, some vehicles in your
lane cannot be detected by the sensor:
• Vehicles offset to one side
• Slow-moving vehicles or sudden-decelerating
vehicles
• Vehicles with higher ground clearance or
vehicles carrying loads that stick out of the
back of the vehicle
• Vehicles that have the front lifted due to
heavy loads
• Vehicles within approximately 2 m (6 ft.) from
your vehicle
• Oncoming vehicles
• Stopped vehicles
• Vehicles with small rear profile, such as
trailers
• Narrow vehicles, such as motorcycles,
bicycles, or powered two-wheelers
• Special vehicles
• Animals and pedestrians
In the following cases, the vehicle in front
cannot be detected by the sensor. Always pay
attention to the road and driving conditions
and drive safely. If necessary, adjust your
vehicle speed.
• You are steering your vehicle
• Driving on narrow or sharply curved roads
599
To Next Page
Loading...
