Tyre Mobility Kit (if equipped)
CAUTION
• Do not use the TMK or sealants with poor quality or performance. Using improper
sealants may cause a malfunction of the tyre pressure monitoring sensor. Only Kia
genuine sealants or those of an equivalent standard can guarantee quality and per
formance.
• After using sealants to repair a punctured tyre, make sure to remove any residue
of the sealant from the tyre pressure monitoring sensor and the wheel. We recom
mend visiting an authorised Kia dealer/service partner for inspection.
NOTE
Sealants and spare parts are available at an authorised Kia dealer. Dispose of the
sealant properly after use. Empty sealant bottles can be disposed at home, and for re
maining sealant, you can bring them to an authorised Kia dealer for disposal.
Technical Data
• System voltage: DC 15 V
• Working voltage: DC 10~15
• Amperage rating: max. 20 A
• Suitable temperatures: -30 to 70 °C (-22 to 158 °F)
• Max. working pressure: 6.2 bar (90 psi)
• Size
◦ Compressor: 150 x 140 x 61 mm (5.9 x 5.5 x 2.4 inches)
◦ Sealant bottle: 209.5 x 85.5 ø mm (8.3 x 3.4 ø inches)
◦ Compressor weight: 840 g (1.85 lbs.)
◦ Sealant volume: 800 ml (48.8 cu. in)
* Sealant and spare parts can be obtained and replaced at an authorised vehicle or
tyre dealer. Empty sealant bottles may be disposed of at home. Liquid residue from
the sealant should be disposed of by your vehicle or tyre dealer or in accordance with
local waste disposal regulations.
735
To Next Page
Loading...
