Replacing components
• Draw vertical lines (Vertical lines passing through respective head lamp centres)
and a horizontal line (Horizontal line passing through centre of head lamps) on the
screen.
• With the head lamp and battery in normal condition, aim the head lamps so the
brightest portion falls on the horizontal and vertical lines.
• To aim the low beam left or right, turn the screwdriver (1) clockwise or counter
clockwise. To aim the low beam up or down, turn the screwdriver (2) clockwise or
counterclockwise.
Aiming point
OMV093052L
* 1: Screen
Table 1. Type A
Head lamp (LED type)
Ground Height Distance between lamps
Vehicle
condition
Tyre size
H1 (LOW) H2 (HIGH) W1 (LOW) W2 (HIGH)
255/60 R19
275/50 R20
933
(36.7)
835
(32.9)
1,621
(63.8)
1,619
(63.7)
without
driver
[mm (in)]
285/45 R21
945
(37.2)
847
(33.3)
1,621
(63.8)
1,619
(63.7)
255/60 R19
275/50 R20
922
(36.3)
825
(32.5)
1,621
(63.8)
1,619
(63.7)
with driver
[mm (in)]
285/45 R21
935
(36.8)
837
(33)
1,621
(63.8)
1,619
(63.7)
811