Features of your vehicle
824
Reverse Parking Distance Warning (PDW)
僅 Reverse Parking Distance Warning
may malfunction when:
- Driving on uneven road, gravel
roads or bushes
- Objects that generate ultrasonic
waves such as vehicle horns, loud
motorcycle engine sound or truck
air brakes are near the sensor
- Heavy rain or water spray is pres
-
ent
- Wireless transmitters or mobile
phones are present near the sensor
- The sensor is covered with snow
- Affected by another vehicle's sen
-
sors
- Water flows on the surface of the
sensor
- Installing the license plate differ
-
ently from the original location
- The vehicle bumper height or sen
-
sor installation has been modified.
- Any non-factory equipment or
accessories have been installed.
僅 The function will operate normally
when such foreign matters are
removed.
僅 The following objects may not be
detected:
- Sharp or slim objects, such as
ropes, chains or small poles
- Objects, which tend to absorb sen
-
sor frequency, such as clothes,
spongy material or snow
- Objects smaller than 100 cm (40
inches) in length and narrower than
14 cm (6 inches) in diameter
- People, animal or objects located
very close to the sensor.
僅 The indicator may operate differently
when the people, animal or obstacle is
located between sensors.
僅 Parking Distance Warning may not
occur sequentially depending on vehi
-
cle speed or obstacle shape.
僅 Have your vehicle inspected by an
authorized Kia dealer.
Reverse Parking Distance Warn
-
ing settings
Warning Volume
With the ignition switch or the ENGINE
START/STOP button in the ON position,
select 'Driver Assistance → Warning Vol
-
ume' from the Settings menu to change
the Warning Volume to 'High', ‘Medium’
or ‘Low’ for Reverse Parking Distance
Warning.
If you change the Warning Volume, the
Warning Volume of other Driver Assis
-
tance functions may change.
To Next Page
Loading...
