91
4
4
Features of your vehicle Wipers and washers
do not remove or damage related
parts the function.
僅 Do not place objects on the crash pad
that reflect light such as mirrors, white
paper, etc. The function may malfunc
-
tion if sunlight is reflected.
僅 At times, High Beam Assist may not
work properly. The function is for your
convenience only. It is the responsibil
-
ity of the driver for safe driving prac
-
tices and always check the road
conditions for your safety.
僅 When the function does not operate
normally, change the lamp position
manually between the high beam and
low beam.
Wipers and washers
The wipers and washers remove foreign
substances from the windshield and rear
window, helping to maintain visibility.
Front
A: Wiper speed control (front)
1. MIST : Single wipe
2. OFF : Off
3. INT : Intermittent wipe
4. LO : Low wiper speed
5. HI : High wiper speed
B: Intermittent control wipe time
adjustment/Auto control wipe time
adjustment
C: Wash with brief wipes (front)
If there is heavy accumulation of snow
or ice on the windshield, defrost the
windshield for about 10 minutes, or until
the snow and/or ice is removed before
using the windshield wipers to ensure
proper operation. If you do not remove
the snow and/or ice before using the
wiper and washer, it may damage the
wiper and washer system.