Kia FORTE 2022 - 僅 Activate Upon Washer Fluid Use; 僅 Recirculation Mode Plus

Features of your vehicle
1164
Windshield defrosting and defogging
Automatic Air Ventilation control
procedure
When set up or release the automatic air
ventilation function, select the Mode
Selection button at heater or air condi
-
tioner is on. And press the Air Intake
Control button for 5 times or over within
3seconds together with pressing the Air
conditioning button. When release the
automatic ventilation function, the Recir
-
culation mode indicator will blink 3 times
at 0.5 second intervals and air direction,
air volume, Recirculation/Fresh mode,
and air conditioner is automatically con
-
trolled.
When it set the automatic ventilation
function, the Recirculation mode indica
-
tor will blink 6 times at 0.25 seconds
intervals and air direction, air volume,
Recirculation/Fresh mode, and air condi
-
tioner is automatically controlled.Auto
dehumidify is activated when you select
‘Setup → Vehicle → Climate → Auto -
matic Ventilation → Auto dehumidify’
from the Settings in the Infotainment
System screen.
For more details, please scan the QR
code in a separately supplied Car Info -
tainment System Quick Reference
Guide.
Activate upon Washer Fluid Use
To prevent the odor from entering inside
the vehicle, the ventilation system
changes to Recirculated Air Mode for a
while when the windshield washer fluid
is sprayed.
However, at low outside temperatures,
to prevent windshield fogging, the sys
-
tem continues to use outside air mode.
System setting
1. ignition switch or the ENGINE START/
STOP button is ON.
2. Select Floor-Level ( ) air flow direc
-
tion by pressing Mode Selection but -
ton.
3. With pressing Air Conditioning button,
press the Recirculated Air button
more than 4 times within 2 seconds.
4. If the system is set up, the indicator on
Recirculated Air button will blinks 6
times.
System cancellation
1. ignition switch or the ENGINE START/
STOP button is ON.
2. Select Floor-Level ( ) air flow direc
-
tion by pressing Mode Selection but -
ton.
3. With pressing Air Conditioning button,
press the Recirculated Air button
more than 4 times within 2 seconds.
4. If the system is cancelled, the indica
-
tor on Recirculated Air button will
blinks 3 times.
Activation on washer fluid is activated
when you select ‘Setup → Vehicle → Cli
-
mate → Recirculate Air → Activate upon
Washer Fluid Use’ from the Settings in
the Infotainment System screen.
For more details, please scan the QR
code in a separately supplied Car Info -
tainment System Quick Reference
Guide.
Recirculation Mode Plus (if
equipped)
To prevent the inflow of polluted air
indoors when passing through the tun -
nel and odor area, this function auto -
matically switches the air conditioner to
Recirculation Mode about 7 seconds
before the vehicle enters the tunnel
based on the map information of the
navigation and the speed of the vehicle.