Kia FORTE 2022 - Page 292

Driving your vehicle
825
Blind-Spot Collision-Avoidance Assist (BCA)
warning light on the side view mirror will
blink for approximately 3 seconds.
In addition, if the engine is turned on,
when the function is set to ‘Active Assist’
or ‘Warning Only’, the warning light on
the side view mirror will blink for approx
-
imately 3 seconds.
WARNING
僅 If ‘Warning Only’ is selected, braking
is not assisted.
僅 If ‘Off’ is selected, the driver should
always be aware of the surroundings
and drive safely.
NOTICE
If the engine is restarted, Blind-Spot Col -
lision-Avoidance Assist will maintain the
last setting.
Warning Timing
With the ignition switch or ENGINE
START/STOP button in the ON position,
select 'Driver Assistance → Warning
Timing' from the 'User Settings (LCD dis
-
play) or Setup → Vehicle (Infotainment
System screen)' menu to change the ini
-
tial warning activation time for Blind-
Spot Collision-Avoidance Assist.
When the vehicle is first delivered, Warn
-
ing Timing is set to ‘Normal’. If you
change the Warning Timing, the Warn -
ing Timing of other Driver Assistance
systems may change.
Warning Volume
With the ignition switch or ENGINE
START/STOP button in the ON position,
select 'Driver Assistance → Warning Vol -
ume' from the 'User Settings (LCD dis -
play) or Setup → Vehicle (Infotainment
System screen)' menu to change the
Warning Volume to 'High', 'Medium' or
'Low' for Blind-Spot Collision-Avoidance
Assist.
If you change the Warning Volume, the
Warning Volume of other Driver Assis
-
tance systems may change.
CAUTION
僅 The setting of the Warning Timing
and Warning Volume applies to all
functions of Blind-Spot Collision-
Avoidance Assist.
僅 Even though ‘Normal’ is selected for
Warning Timing, if a vehicle
approaches at high speed, the warn
-
ing may seem late.
OMQ4AH050334
OBD041619L