83
5
5
Driving your vehicle Blind-Spot Collision-Avoidance Assist (BCA)
僅 Select ‘Late’ for Warning Timing when
traffic is light and when driving speed
is slow.
Blind-Spot Collision-Avoidance
Assist Operation
Warning and control
Vehicle detection
僅 To warn the driver a vehicle is
detected, the warning light on the side
view mirror will illuminate.
僅 Blind-Spot Collision-Avoidance Assist
will operate when your vehicle speed
is above 12 mph (20 km/h) and the
speed of the vehicle in the blind spot
area is above 7 mph (10 km/h).
Collision warning
僅 Collision warning will operate when
the turn signal is turned on in the
direction of the detected vehicle.
僅 If ‘Warning Only’ is selected from the
settings menu, the collision warning
will operate when your vehicle
approaches the lane the blind spot
vehicle is detected.
僅 To warn the driver of a collision, the
warning light on the side view mirror
will blink.
僅 When the turn signal is turned off or
you move away from the lane, the col
-
lision warning will be canceled and
the function will return to vehicle
detection state.
僅 The detecting range of the rear corner
radar is determined by a standard
road width, therefore, on a narrow
road, Blind-Spot Collision-Avoidance
Assist may detect other vehicles in the
second lane from your vehicle and
warn you.
僅 In contrast, on a wide road, Blind-Spot
Collision-Avoidance Assist may not be
able to detect a vehicle driving in the
next lane and may not warn you.
僅 When the hazard warning light is on,
the collision warning by the turn sig
-
nal will not operate.
If the driver's seat is on the left side, the
collision warning may occur when you
turn left. Maintain a proper distance with
the vehicles in the left lane. If the driver's
seat is on the right side, the collision
warning may occur when you turn right.
Maintain a proper distance with the
vehicles in the right lane.
To Next Page
Loading...
