Safety features of your vehicle
103
Seats
Seatback angle
1. Push the control switch forward or
backward to move the seatback to the
desired angle.
2. Release the switch once the seat
reaches the desired position.
Seat cushion tilt and height
1. Pull the front portion (1) of the control
switch up to raise or press down to
lower the front part of the seat cush
-
ion.
2. Pull the rear portion (2) of the control
switch up to raise or press down to
lower the back part of the seat cush
-
ion.
3. Release the switch once the seat
reaches the desired position.
Lumbar support (if equipped)
The lumbar support can be adjusted by
pressing the lumbar support switch on
the side of the seat.
1. Press the front portion (1) of the
switch to increase support, or the rear
portion (2) of the switch, to decrease
support.
2. Release the switch once it reaches the
desired position.
Headrest (for front seat)
The driver's and front passenger's seats
are equipped with a headrest for the
occupant's safety and comfort.
The headrest not only provides comfort
for the driver and front passenger, but
To Next Page
Loading...
