117
5
5
Driving your vehicle Navigation-based Smart Cruise Control (NSCC)
Navigation-based Smart Cruise
Control standby
If the operating conditions are satisfied,
the white ( ) symbol will illuminate.
Navigation-based Smart Cruise
Control operating
If temporary deceleration is required in
the standby state and Navigation-based
Smart Cruise Control is operating, the
green ( ) symbol will illuminate on
the cluster.
If the Set Speed Auto Change function
operates, the green ( ) symbol and
green set speed will illuminate on the
cluster, and an audible alarm will sound.
'Drive carefully' warning message will
appear in the following circumstances:
僅 Navigation-based Smart Cruise Con
-
trol is not able to slow down your
vehicle to a safe speed.
Highway Curve Zone Auto Slowdown
and Set Speed Auto Change function
uses the same ( ) symbol.
Highway Curve Zone Auto Slow
-
down
僅 Depending on the curve ahead on the
highway (or motorway), the vehicle
will decelerate, and after passing the
curve, the vehicle will accelerate to
Smart Cruise Control set speed.
僅 Vehicle deceleration time may differ
depending on the vehicle speed and
the degree of the curve on the road.
The higher the driving speed, the
faster the vehicle will decelerate.
Set Speed Auto Change
僅 Set Speed Auto Change function will
operate when Smart Cruise Control
To Next Page
Loading...
