Maintenance
327
Wiper blades
Type A
1. Raise the wiper arm.
2. Lift up the wiper blade clip (1). Then
pull down the blade assembly (2) and
remove it.
3. Install the new blade assembly.
4. Return the wiper arm on the wind
-
shield.
5. Turn ignition to the ON position and
wiper arms will return to the normal
operating position.
Type B
1. Raise the wiper arm and turn the
wiper blade assembly to expose the
plastic locking clip.
2. Compress the clip (1) and slide the
blade assembly (2) downward.
To Next Page
Loading...
