33
7
7
Maintenance Wiper blades
3. Lift it off the arm.
4. Install the new blade assembly.
5. Return the wiper arm on the wind
-
shield.
6. Turn ignition to the ON position and
wiper arms will return to the normal
operating position.
Rear window wiper blade
1. Raise the wiper arm and pull out the
wiper blade assembly(1).
2. Install the new blade assembly by
inserting the center part into the slot
in the wiper arm until it clicks into
place.
3. Make sure the blade assembly is
installed firmly by trying to pull it
slightly.
To prevent damage to the wiper arms or
other components, have an authorized
Kia dealer replace the wiper blade.
To Next Page
Loading...
