Maintenance
387
Tires and wheels
Without a spare tire
Directional tires (if equipped)
Rotate radial tires that have an asym
-
metric tread pattern only from front to
rear and not from right to left.
Mixing tires
僅 Do not use the compact spare tire (if
equipped) for tire rotation.
僅 Do not mix bias ply and radial ply tires
under any circumstances. This may
cause unusual handling characteris
-
tics.
Wheel alignment and tire balance
The wheels on your vehicle were aligned
and balanced carefully at the factory to
give you the longest tire life and best
overall performance.
In most cases, you will not need to have
your wheels aligned again. However, if
you notice unusual tire wear or your
vehicle pulling one way or the other, the
alignment may need to be reset.
If you notice your vehicle vibrating when
driving on a smooth road, your wheels
may need to be rebalanced.
Wheel weight
Improper wheel weights can damage
your vehicle's aluminum wheels. Use
only approved wheel weights.
Tire replacement
If the tire is worn evenly, a tread wear
indicator (A) will appear as a solid band
across the tread.
This shows there is less than 1/16 inch
(1.6 mm) of tread left on the tire. Replace
the tire when this happens.
Do not wait for the band to appear
across the entire tread before replacing
the tire.
The Anti-lock Brake System (ABS) works
by comparing the speed of the wheels.
The tire size affects wheel speed. When
replacing tires, all 4 tires must use the
same size originally supplied with the
vehicle. Using tires of a different size can
cause the ABS and Electronic Stability
Control (ESC) to work irregularly.
To Next Page
Loading...
