Maintenance
487
Fuses
Replacing inner panel fuse
1. Turn the ENGINE START/STOP button
to the OFF position and all other
switches off.
2. Open the fuse panel cover.
3. Pull the suspected fuse straight out.
Use the removal tool provided on the
engine fuse panel cover.
4. Check the removed fuse; replace it if
it is blown.
Spare fuses are provided in the
engine compartment fuse panel.
5. Push in a new fuse of the same rating,
and make sure it fits tightly in the
clips.
If it fits loosely, consult an authorized Kia
dealer.
If you do not have a spare, use a fuse of
the same rating from a circuit you may
not need for operating the vehicle, such
as the power outlet fuse.
If the head lamp, turn signal lamp, stop
signal lamp, fog lamp, DRL, tail lamp or
High Mounted Stop Lamp (HMSL) do not
work and the fuses are OK, check the
fuse panel in the engine compartment. If
a fuse is blown, it must be replaced.
If the headlamp, fog lamp, turn signal
lamp, or tail lamp malfunction even with
-
out any problem to the lamps, have the
vehicle checked by an authorized Kia
dealer for assistance.
Replacing engine compartment
fuse
1. Turn the ENGINE START/STOP button
to the OFF position and all other
switches off.
2. Remove the fuse panel cover by
pressing the tab and pulling the cover
up.
3. Check the removed fuse; replace it if
it is blown. To remove or insert the
fuse, use the fuse puller in the engine
compartment fuse panel.
To Next Page
Loading...
