Maintenance
507
Fuses
Do not disassemble or assemble the
multi fuse when it is secured with nuts
and bolts. Incorrect or partial assembly
torque may cause a fire. Have the vehi
-
cle checked by an authorized Kia dealer.
Battery fuse
If the battery fuse is blown, it must be
removed as follows:
1. Disconnect the negative battery cable.
2. Remove the nuts shown in the picture
below.
3. Replace the fuse with a new one of
the same rating.
4. Reinstall in the reverse order of
removal.
If the battery fuse is blown, have the
vehicle checked by an authorized Kia
dealer.
Visually inspect the battery cap to
ensure it is securely closed. If the battery
cap is not securely closed, moisture may
enter the system and damage the elec
-
trical components.
Fuse/relay panel description
Inside the fuse/relay panel covers, you
can find the fuse/relay label describing
fuse/relay name and capacity.
Driver's side fuse panel
Not all fuse panel descriptions in this
manual may be applicable to your vehi
-
cle. It is accurate at the time of printing.
When you inspect the fuse panel in your
vehicle, refer to the fuse panel label on
the inside of the fuse cover. This dia
-
gram will provide you with the specific
information for your vehicles.
To Next Page
Loading...
