69
7
7
Maintenance Light bulbs
High mounted stop lamp (LED
type) bulb replacement
If the high mounted stop lamp (1) does
not operate, have the vehicle checked
by an authorized Kia dealer.
Map lamp (Bulb type) bulb
replacement
Prior to working on the Interior lamps,
ensure that the “OFF” button is
depressed to avoid burning your fingers
or receiving an electric shock.
1. Using a flat-blade screwdriver, gently
pry the lens cover from lamp housing.
2. Remove the bulb by pulling it straight
out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the
lamp housing notches and snap the
lens into place.
Be careful not to dirty or damage the
lens, lens tab, and plastic housings.
Allow the bulb to cool down before han
-
dling it.
Map lamp (LED type) bulb
replacement
If the map lamp (LED) (1), does not oper
-
ate, have the vehicle checked by an
authorized Kia dealer.
The LED lamps cannot be replaced as a
single unit because it is an integrated
unit. The LED lamps has to be replaced
with the unit.
A skilled technician should check or
repair the map lamp (LED), for it may
damage related parts of the vehicle.
To Next Page
Loading...
