71
7
7
Maintenance Light bulbs
depressed to avoid burning your fingers
or receiving an electric shock.
1. Using a flat-blade screwdriver, gently
pry the lamp assembly from interior.
2. Remove the bulb by pulling it straight
out.
3. Install a new bulb in the socket.
4. Install the lamp assembly to interior.
Be careful not to dirty or damage the
lens, lens tab, and plastic housings.
Liftgate room lamp (Bulb type)
bulb replacement
1. Open the liftgate.
2. Remove the lamp assembly by using
a flat-blade screwdriver.
3. Remove the cover from the lamp
assembly.
4. Remove the bulb by pulling it straight
out.
5. Install a new bulb in the socket.
6. Install the cover to the lamp assembly.
7. Install the lamp assembly to the body
of the vehicle.
Be careful not to dirty or damage the
lens, lens tab, and plastic housings.
Glove box lamp (Bulb type)
replacement
1. Using a flat-blade screwdriver, gently
pry the lamp assembly from interior.
2. Remove the bulb by pulling it straight
out.
3. Install a new bulb in the socket.
4. Install the lamp assembly to interior.
Be careful not to dirty or damage the
lens, lens tab, and plastic housings.
To Next Page
Loading...
