CYLINDER HEAD ASSEMBLY EMA -53
NOTE
Be careful the right, left bank, intake, exhaust side
before assembling.
A
B
C
D
ECBF036A
A : L(LH),R(RH)
B : I(Intake),None(Exhaust)
C : Journal number
D:Frontmark
CAUT
ION
Rotate the crankshaft not to contact the valves
to the pistons by making the pistons below
10mm(0.3937in.) from the top of cylinder block.
7. Ins
tall water temperature control assembly.
8. Install timing chain.
9. Check and adjust valve clearance.
10. Ins
tall the exhaust manifold.
11. Ins tall the intake manifold.
To Next Page
Loading...