GENERAL EMA -9
3. After disconnecting the MAF sensor connector(A) and
the breather hose(B), remove the air cleaner assem-
bly(C).
C
A
B
SBLM16002L
4. Disconnect the other breather hose(A), the Purge
Control Solenoid Valve(PCSV) hose, the Positive
Crankcase Ventilation (PCV) hose(C) and the Elec-
tronic Throttle Control(ETC) cooling hoses(D) and
connector(E).
D
E
C
SBLM16208L
A
SBLM16005L
5. Removethewiringoverthesurgetank.
1) Disconnect the injection harness connector(A).
2) Disconnect the camshaft position sensor(CMP)
harness connector(B).
3) Disconnect the ground line(C).
4) Disconnect the ignition coil har ness connec-
tor(D).
5) Disconnect the condensor connector(E).
6) Disconnect the var iable induction system(VIS)
solenoid valve connector(G).
7) Disconnect the oil control valve(OCV) har ness
connector(F).
8) Disconnect the injector wir ing(H) and ignition coil
wiring(I).
D
B
A
E
C
F
SBLM16006L
H
G
I
SBLM16206L
To Next Page
Loading...