Kia K4 2025 - 僅 High Beam Assist (HBA)

Features of your vehicle
864
Lighting
僅 Turn the fog light switch (1) to the OFF
position.
NOTICE
When in operation, the fog lights con -
sume large amounts of vehicle electrical
power. Only use the fog lights when visi -
bility is poor.
High Beam Assist (HBA)
High Beam Assist is a function that auto -
matically adjusts the headlight range
(switches between high beam and low
beam) depending on the brightness of
detected vehicles and certain road con
-
ditions.
Detecting sensor
Front view camera
The front view camera is used as a
detecting sensor to detect ambient light
and brightness while driving.
Refer to the picture for the detailed loca
-
tion of the detecting sensor.
NOTICE
僅 Always keep the front view camera in
good condition to maintain optimal
performance of High Beam Assist.
僅 For more details on the precautions of
the front view camera, refer to "For
-
ward Collision-Avoidance Assist (FCA)
(Sensor Fusion) (if equipped)" on page
6-4.
High Beam Assist setting
With the ENGINE START/STOP button in
the ON position, select Setup → Vehicle
→ Lights → High Beam Assist from the
Settings menu to turn on High Beam
Assist and deselect to turn off the func
-
tion.
WARNING
Change the Settings only after parking
the vehicle at a safe location.
High Beam Assist operation
Display and control
僅 After selecting 'High Beam Assist' in
the Settings menu, High Beam Assist
will operate by following the proce
-
dure below.
- Place the headlight switch in the
AUTO position and push the head
-
light lever towards the instrument
cluster. High Beam Assist indi
-
cator light will appear on the cluster
and the function will be enabled.
- When the function is enabled, high
beam will turn on when vehicle
speed is above 30 km/h (20 mph).
When vehicle speed is below 20
OCL4MGTL034009N
OCL4M054001N
ONQ5031145L