125
4
4
Features of your vehicle Infotainment system
Updating Software
1 Details
2 Close
You can see the progress of the update
on the screen.
After the update is complete, you will
receive a notification on your phone or
the vehicle screen that the software
update is complete.
僅 The screen turns off automatically
after 3 minutes to save battery life. If
the screen turns off automatically,
you can check the update progress by
pressing the ignition switch or
ENGINE START/STOP button.
僅 After the update starts, you can exit
the vehicle.
僅 The OTA software update feature is
only available for Kia Connect service
users.
僅 The update details may vary depend
-
ing on the installed software version.
僅 Check the notice for the OTA software
update on the Kia website.
僅 If the update fails, the update recov
-
ery will automatically proceed. If you
want to retry the software update,
even after a successful recovery, con
-
tact an authorized Kia call center.
僅 If the update or recovery fails, con
-
tacting an authorized Kia dealer.
僅 After the update is complete, it may
provide new functions or improve
-
ments. For more information, see
"Over-The-Air Software Update" page
on the Kia webpage, scan the QR
code on the infotainment screen or
refer to the user manual in the
Cus
-
tomer Center
→
Download Center
.
僅 Observe the following restrictions
during the update.
- You cannot use the vehicle during
the update. Be sure to have enough
time for the update, and safely park
the vehicle before starting the
update process.
- You cannot use remote features,
including remote start.
- The vehicle cannot be charged.
Charge your vehicle after complet
-
ing the update.
- The Rear Occupant Alert may not
work. Visually check if there are any
occupants in the rear seat after the
update starts.
-If the digital key function is
included in the update history, the
door lock/unlock function through
digital key or fingerprint authenti
-
cation may not work. Check the
notice and use the smart key but
-
ton to lock or unlock the door if the
digital key function is updated.
僅 The update will automatically cancel if
any vehicle conditions required for
the update are changed before start
-
ing the update.
僅 Once the update has started, you can
-
not cancel the update.
僅 You cannot use the OTA software
update feature if you modify or
replace any vehicle software.