Driver assistance guide
766
Lane Following Assist (LFA)
Lane Following Assist settings
Warning Methods
1 Driver Assistance
2 Warning Methods
The
Warning Methods
can be set with
the vehicle on. Select
Setup
→
Vehicle
→
Driver Assistance
→
Warning Meth
-
ods
from the settings menu in the info
-
tainment system to change the following
settings:
僅
Warning Volume
: Adjusts the volume
of the warning sound. If you turn off
the
Warning Volume
, for your safety,
the function may warn you with a low
volume.
僅
Driving Safety Priority
: Lowers all
other audio volumes when the Driving
Safety system sounds a warning.
僅 If you change the
Warning Methods
,
it can be applied to each function of
the driver assistance system. Please
check and change it in each function.
僅 If the vehicle is restarted,
Warning
Methods
will maintain the last setting.
僅 The setting menu may not exist based
on vehicle specification.
Lane Following Assist operation
Turning Lane Following Assist
On/Off
With the vehicle on, shortly press the
Lane Driving Assist button located on
the steering wheel to turn on Lane Fol
-
lowing Assist. The gray or green ( )
indicator light will appear on the cluster.
Press the Lane Driving Assist button
again to turn off Lane Following Assist.
Warning and control
Lane Following Assist
If the vehicle ahead and/or both lane
markings are detected and Your driving
speed is below 180 km/h (110 mph), the
green ( ) indicator light appears on the
cluster, and Lane Following Assist helps
center the vehicle in the lane by assist
-
ing the steering wheel.
When the steering wheel is not assisted,
the white ( ) indicator light blinks and
change to gray.
To Next Page
Loading...
