Driver assistance guide
906
Rear View Monitor (RVM)
With the vehicle on, select the setup icon
( ) on the screen or
Setup
→
Vehicle
→
Driver Assistance
→
Parking Safety
→
Camera Settings
from the infotainment
system screen to change the Rear View
Monitor settings.
Extended Rear View Monitor
If Extended Rear View Monitor use is
selected, the rear camera is displayed
even when shifting from R (Reverse) to
N (Neutral) or D (Drive).
Rear View Parking Guidance
If Rear View Parking Guidance in the dis
-
play information is selected, Rear View
Parking Guidance and Top Rear View
Parking Guidance are displayed in the
rear monitor.
The setting menu may not be available
for your vehicle depending on the vehi
-
cle specifications.
僅 The horizontal lines of the Rear View
Parking Guidance indicate distances
of 0.5 m (20 in),1 m (40 in) and 2.3 m
(91 in) from the vehicle. based on the
empty vehicle condition.
僅 The horizontal scale of the Top View
Parking Guidance indicates distances
of 0.5 m (20 in), and 1.5 m (60 in)
from the vehicle. based on the empty
vehicle condition.
Rear View Monitor operation
Parking/View button
Press the Parking/View button (1) while
the gear is in P (Park) or N (Neutral) to
turn on the Rear View Monitor.
Rear view
Operating conditions
The Rear View function will turn on
under the following conditions:
僅 Shifting the gear to R (Reverse).
僅 Pressing the Parking/View button (1)
while P (Park), N (Neutral) or D (Drive)
and the vehicle speed is slower than
10 km/h (6 mph)
Pressing the View switching button (2)
with the Rear top view on the screen
allows you to select rear top view, rear
view, or rear wide view.
To Next Page
Loading...
