Safety features of your Kia
183
Seat belts
speed is 20 km/h (12 mph) and faster,
the warning light will blink and warning
chime will sound for approximately 100
seconds.
僅 Even if the front passenger seat is not
occupied, the seat belt warning light
will appear for 6 seconds.
僅 The front passenger's seat belt warn
-
ing may operate when luggage is
placed on the front passenger seat.
Seat belt - Driver's 3-point system
with emergency locking retractor
The following explains how to fasten and
adjust the driver's seat belt.
Fastening the your seat belt:
僅 Pull it out of the retractor and insert
the metal tab (1) into the buckle (2).
There will be an audible "click" when
the tab locks into the buckle.
The seat belt automatically adjusts to
the proper length only after the lap belt
portion is adjusted manually so that it
fits snugly around your hips. If you lean
forward in a slow, easy motion, the belt
will extend and let you move around. If
there is a sudden stop or impact, how
-
ever, the belt will lock into position. It will
also lock if you try to lean forward too
quickly.
You should place the lap belt portion as
low as possible and snugly across your
hips. If the lap belt is located too high on
your waist, it may increase the chance of
injury in the event of a collision.
The arm closest to the seat belt buckle
should be over the belt while the other
arm should be under the belt as shown
in the illustration. Never wear the seat
belt under the arm closest to the door.
If you are unable to pull out the seat belt
from the retractor, firmly pull on the belt
and release it. You should then be able
to pull the belt out smoothly.
Releasing the seat belt:
僅 Press the release button (1) in the
locking buckle.
When it is released, the belt should auto
-
matically draw back into the retractor.
If this does not happen, check the belt to
be sure it is not twisted, then try again.
To Next Page
Loading...
