Maintenance
428
Fuses
Main fuse (Multi fuse)
If the multi fuse is blown, it must be
removed as follows:
1. Turn the ENGINE START/STOP button
and all other switches off.
2. Disconnect the negative battery cable.
3. Remove the nuts shown in the picture
above.
4. Replace the fuse with a new one of
the same rating.
5. Reverse these steps to reinstall the
multi fuse.
Do not modify the multi fuse when it is
secured with nuts and bolts. Incorrect or
partial assembly torque may cause a
fire. Have the vehicle checked by an
authorized Kia dealer.
Battery fuse
If the battery fuse is blown, it must be
removed as follows:
1. Disconnect the negative battery cable.
2. Remove the nuts shown in the picture
below.
3. Replace the fuse with a new one of
the same rating.
4. Reinstall in the reverse order of
removal.
If the battery fuse is blown, have the
vehicle checked by an authorized Kia
dealer.
Visually inspect the battery cap to
ensure it is securely closed. If the battery
cap is not securely closed, moisture may
enter the system and damage the elec
-
trical components.
Fuse/relay panel description
Inside the fuse/relay panel covers, you
can find the fuse/relay label describing
fuse/relay name and capacity.
To Next Page
Loading...
