Driver assistance system
766
Smart Cruise Control (SCC)
vehicle ahead of you starts moving, your
vehicle will start as well.
In addition, after the vehicle has stopped
and a certain time have passed, the 'Use
switch or pedal to accelerate' message
will appear on the cluster. Depress the
accelerator pedal or operate the +
switch, - switch or switch to start
driving.
While the message is displayed on the
cluster, if there is no vehicle in front or
the vehicle is far away from you, and the
+ switch, â switch or switch is oper
-
ated, Smart Cruise Control will automati
-
cally cancel and the EPB will be applied.
However, if the accelerator pedal is
depressed, EPB will not be applied even
though Smart Cruise Control is canceled.
Always pay attention to the road condi
-
tion ahead.
Warning road conditions ahead
In the following situation, the 'Watch for
surrounding vehicles' warning message
will appear on the cluster, and an audi
-
ble warning will sound to warn the driver
of road conditions ahead.
ċ
The vehicle in front disappears when
Smart Cruise Control is maintaining
the distance with the vehicle ahead
while driving below a certain speed.
Always pay attention to vehicles or
objects that may suddenly appear in
front of you, and if necessary, depress
the brake pedal to reduce your driving
speed in order to maintain a safe dis
-
tance.
Collision Warning
While Smart Cruise Control is operating,
when the collision risk with the vehicle
ahead is high, the 'Collision Warning'
warning message will appear on the
cluster, and an audible warning will
sound to warn the driver. Always have
your eyes on the road while driving, and
if necessary, depress the brake pedal to
reduce your driving speed in order to
maintain a safe distance.
To Next Page
Loading...
