Maintenance
648
Light bulbs
body of vehicle using the flat-blade
screwdriver.
5. Remove the socket from the assembly
by pressing it in and rotating it coun
-
terclockwise.
6. Pull the bulb out of the socket.
7. Insert a new bulb into socket.
8. Push the socket into the assembly
and turn the socket clockwise.
9. Reinstall the assembly to the body of
the vehicle.
Replacing tail lamp, tail & stop
lamp, rear side marker bulb (LED
type)
If the tail lamp (1), tail & stop lamp (2)
and side marker lamp (3) does not oper
-
ate, have the vehicle checked by an
authorized Kia dealer.
Replacing high mounted stop
lamp bulb (LED type)
If the high mounted stop lamp (LED
type) (1) does not operate, have the vehi
-
cle checked by an authorized Kia dealer.
The LED lamp cannot be replaced as a
single component because it is an inte
-
grated unit. The LED lamp has to be
replaced with the unit.
A skilled technician should check or
repair the high mounted stop lamp (LED
ODL3A070103
ODL3A070104
ODL3A070101
ODL3079051
To Next Page
Loading...
