Features of your vehicle
1145
Lighting
Operating turn signals and lane
change signals
The ignition switch or ENGINE START/
STOP button must be on for the turn sig
-
nals to function.
To turn on the turn signals:
僅 Move the lever up or down (A).
The green arrow indicators on the
instrument panel indicate which turn
signal is operating.
They will self-cancel after a turn is
completed. If the indicator continues
to flash after a turn, manually return
the lever to the OFF position.
To signal a lane change:
僅 Move the turn signal lever slightly and
hold it in position (B).
The lever will return to the OFF posi
-
tion when released.
If an indicator stays on and does not
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned out
and will require replacement.
One-touch lane change function
To activate a one-touch lane change
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3, 5 or 7 times.
You can activate or deactivate the One
Touch Turn Signal function or choose
the number of blinking (3, 5, or 7) by
selecting "Vehicle →Lights → One Touch
Turn Signal".
If an indicator flash is abnormally quick
or slow, a bulb may be burned out or
have a poor electrical connection in the
circuit. The bulb may require replace
-
ment.
The infotainment system may change
after software updates. For more infor
-
mation, refer to the user's manual pro
-
vided in the infotainment system and
the quick reference guide.
Operating front fog light (if
equipped)
Fog lights are designed to provide
improved visibility when visibility is poor
due to fog, rain or snow, etc.
The fog lights will turn on when the fog
light switch (1) is turned to the on posi
-
tion after the headlamp is turned on.
To turn off the fog lights:
僅 Turn the fog light switch (1) to the ON
position.
When in operation, the fog lights con
-
sume large amounts of vehicle electrical
power. Only use the fog lights when visi
-
bility is poor.
To Next Page
Loading...
