Driving your vehicle
1026
Manual Speed Limit Assist (MSLA)
Manual Speed Limit Assist
(MSLA)
1
Speed Limit indicator
2
Set speed
You can set the speed limit when you do
not want to drive over a specific speed.
If you drive over the preset speed limit,
Manual Speed Limit Assist operates (set
speed limit will blink and chime will
sound) until the vehicle speed returns
within the speed limit.
Manual Speed Limit Assist opera
-
tion
Setting speed limit
1. Press and hold Driving Assist ( ) but
-
ton at the desired speed. The Speed
Limit ( ) indicator will appear
on the cluster.
2. Push the (+) switch up or (-) switch
down, and release it at the desired
speed.
Push the (+) switch up or (-) switch
down and hold it. The speed will
increase or decrease to the nearest
multiple of 5 in mph (multiple of 10) at
first, and then increase or decrease by
5 mph (10 km/h).
3. The set speed limit will be displayed
on the cluster.
If you would like to drive over the pre
-
set speed limit, depress the accelera
-
tor pedal beyond the pressure point
to activate the kickdown mechanism.
The set speed limit will blink and
chime will sound until you return the
vehicle speed within the speed limit.
When the accelerator pedal is not
depressed beyond the pressure point,
vehicle speed will maintain within the
speed limit.
To Next Page
Loading...
