Kia Niro HEV 2023 - 僅 Replacing Map Lamp (Bulb Type); 僅 Replacing Room Lamp (Bulb Type)

61
8
8
Maintenance Light bulbs
2. Using a flat-blade screwdriver, gently
pry the lens cover from lamp housing.
3. Remove the bulb by pulling it straight
out.
4. Install a new bulb in the socket.
5. Align the lens cover tabs with the
lamp housing notches and snap the
lens into place.
Replacing map lamp (Bulb type)
WARNING
Interior lamps
Prior to working on the Interior lamps,
ensure that the "OFF" button is
depressed to avoid burning your fingers
or receiving an electric shock.
1. Turn off vehicle and disconnect the (-)
battery terminal (For plug-in hybrid
vehicle) or battery connector (For
hybrid vehicle).
2. Using a flat-blade screwdriver, gently
pry the lens cover from lamp housing.
3. Remove the bulb by pulling it straight
out.
4. Install a new bulb in the socket.
5. Align the lens cover tabs with the
lamp housing notches and snap the
lens into place.
CAUTION
Be careful not to dirty or damage the
lens, lens tab, and plastic housings.
Replacing room lamp (Bulb type)
WARNING
Interior lamps
Prior to working on the Interior lamps,
ensure that the "OFF" button is
depressed to avoid burning your fingers
or receiving an electric shock.
1. Turn off vehicle and disconnect the (-)
battery terminal (For plug-in hybrid
vehicle) or battery connector (For
hybrid vehicle).
2. Using a flat-blade screwdriver, gently
pry the lens cover from lamp housing.
3. Remove the bulb by pulling it straight
out.
4. Install a new bulb in the socket.
5. Align the lens cover tabs with the
lamp housing notches and snap the
lens into place.
CAUTION
Be careful not to dirty or damage the
lens, lens tab, and plastic housings.
OSG2H071056
OSG2H071058