Kia NIRO - FUSES

FUSES
❈ Left side : Normal
Right side : Blown
A vehicle’s electrical system is protec‐
ted from electrical overload damage by
fuses.
This vehicle has 2 (or 3) fuse panels,
one located in the driver’s side panel
bolster, the other in the motor com‐
partment near the battery.
If any of your vehicle’s lights, accesso‐
ries, or controls do not work, check the
appropriate circuit fuse. If a fuse has
blown, the element inside the fuse will
melt.
If the electrical system does not work,
first check the driver’s side fuse panel.
Before replacing a blown fuse, discon‐
nect the negative battery cable. Always
replace a blown fuse with one of the
same rating.
If the replacement fuse blows, this indi‐
cates an electrical problem. Avoid using
the system involved and immediately
consult A professional workshop. Kia
recommends to consult an authorized
Kia dealer/service partner.
Three kinds of fuses are used: blade
type for lower amperage rating, car‐
tridge type, and multi fuse for higher
amperage ratings.
WARNING
n
Fuse r
eplacement
• Never replace a fuse with anything
but
another fuse of the same rat‐
ing.
• A higher capacity fuse could cause
damage and possibly a fir
e.
• Never install a wire or aluminum
foil instead of the proper fuse -
even as a temporary repair. It may
cause extensive wiring damage
and a possible fire.
• Do not arbitrarily modify or add-
on electric wiring to the vehicle.
CAUTION
Do not use a screwdriver or any oth‐
er metal object to remove fuses be‐
cause it may cause a short circuit
and damage the system.
8-37
8
Maintenance