4-51
✽✽
NOTICE
To ensure better control of the auto light
system, never place items on the sensor
located on the dash. Don’t clean the sensor
with a window cleaner, only use a towel damp-
ened with water. If your front windshield has a
coating or tint the auto light system may not
work properly.
High-Beam Operation
To turn on the high-beam headlights, push the
lever away from you. Pull it back for low beams.
The high-beam indicator will light when the head-
light high beams are switched on.
To prevent the battery from being discharged, do
not leave the lights on for a prolonged time while
the engine is not running.
CCGQ0411
CCGQ0416
External illumination sensor
Sedona USA 4.qxd 5/10/2005 10:24 AM Page 51
To Next Page
Loading...
