ROAD WARNING
Hazard Warning Flasher
The hazard warning flasher serves as a warning to
other drivers to exercise extreme caution when
approaching, overtaking, or passing your vehicle. It
should be used whenever emergency repairs are
being made, when the vehicle is stopped near the
edge of a roadway, or whenever your vehicle is in
distress.
Depress the flasher switch to activate at any time.
The flasher switch is located in the center console
switch panel. All turn signal lights will flash
simultaneously.
• The hazard warning flasher operates whether
your vehicle is running or not.
• The turn signals do not work when the hazard
flasher is on.
• Care must be taken when the hazard warning
flasher is used while the vehicle is being towed.
Local regulations may prohibit using it in this
manner.
In Case Of An Emergency
6-2
CGQ03909
To Next Page
Loading...
