Front Turn Signal Light Bulb Replacement
1. Open the hood.
2. Remove the light assembly from the body of the
vehicle removing the bolts.
3. Disconnect the front turn signal light electrical
connector.
Maintenance
7-56
4GQN703
4. Remove the socket from the assembly by turning
the socket counter clockwise until the tabs on
the socket align with the slots on the assembly.
5. Remove the bulb from the socket by pressing it
in and rotating it until the tabs on the bulb align
with the slot in the socket. Pull the bulb out of the
socket.
CGQ07116
To Next Page
Loading...
