7-63
License Plate Light Bulb Replacement
1. Using a cross-tip screwdriver, remove the two
lens retaining screws.
2. Remove the lens.
3. Pull the bulb holder assembly down.
4. Remove the bulb by pulling it straight out.
5. Install a new bulb.
6. Reassemble the lens and bulb holder assembly
and secure with the two lens retaining screws.
CGQ07105
Rear Combination Light Bulb Replacement
1. Open the rear hatch.
2. Using a cross-tip screwdriver, remove the two (2)
screws.
CBGQ1050
➀ Stop/Tail light
➁ Turn signal light
➂ Back up light
➃ Stop/Tail light
To Next Page
Loading...
