9
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
*IF EQUIPPED
The ESC system is designed to help stabilize the vehicle during cornering
maneuvers. It is a good idea to keep the ESC turned on for daily driving
whenever possible.
Press ESC OFF button
A
to turn Traction Control OFF/ON.
To turn OFF both the Traction Control and Stability Control, press and hold for
more than 3 seconds. Press again to turn ON.
HAC helps prevent the vehicle from rolling backwards when accelerating
from a stop while on a steep incline. The HAC automatically activates
whether the ESC is OFF or ON but does NOT activate when the ESC has
malfunctioned.
REMINDERS:
• ESC is active by default at vehicle start-up
• The ESC Indicator Light in the instrument cluster will illuminate whenever the ESC is
in operation
For more information on Electronic Stability Control (ESC) and its specific features and
operations, please refer to your Owner’s Manual.
Electronic Stability Control (ESC)
Hill-Start Assist Control (HAC)
REMINDER: The HAC does not operate when the gear shift is in the P (Park) or the N
(Neutral) position.
When HAC is active (e.g., during initial acceleration from a stop on an incline),
you may notice that the brakes will momentarily remain engaged after you
depress the accelerator – this is normal HAC operation.
QUICK TIP
(Button panel located left of Steering Wheel)
(Outlet located on back of Center Console
and the Luggage Zone*)
A
B C
Instrument Panel Dimmer
AC Inverter*
With parking lights/headlights ON, press button
B
(+) or (-)
to adjust the brightness of the instrument panel illumination.
REMINDER: The Instrument Panel Dimmer does not adjust brightness on the
AVN System* screen, use AVN setup to adjust brightness on the AVN System.
The AC Inverter supplies 115V/100W electrical power to operate
accessories or equipment. Press AC Inverter button
C
to activate.
AC115V
MAX100W
DRIVER'S PANEL
To Next Page
Loading...
