Kia sedona 2015 - 2 Nd-Row Tumble (Center) Seat

SEDONA FEATURES & FUNCTIONS GUIDE
34
*IF EQUIPPED
SEATING
Removing the Tumble Seat
1. Insert the seat belt into the belt assembly cover, and the seat belt buckle
into the seat cushion pocket.
2. Lower the headrest
A
to the lowest position
3. Slide the Seat backward to the farthest position
4. Pull up the recline strap
B
and fold the Seatback forward
5. Pull the removal strap
C
and lift the back of the Tumble Seat forward
6. Pull up the catch release lever
D
under the Tumble Seat cushion and lift
out of the anchors
Installing Tumble Seat
1. Place and align the Tumble Seat properly
E
2. Lower Tumble Seat and push down firmly until it clicks into place
3. Ensure the Tumble Seat is latched securely by the green indicator
4. Pull up the Tumble Seatback recline strap
F
, lift Seatback backward
until it locks (clicks) into place
5. Return the Seat Belt to its proper position
2nd-Row Tumble (Center) Seat*
REMINDERS:
• Never install or remove the Tumble Seat while there are occupants in the 3rd-Row Seat
• Ensure to raise up both the left and right side seatbacks before installing tumble seat
For more information on the Tumble Seat, refer to the Owner's Manual.
For more information on removing the Tumble Seat, refer to the Owner's Manual.
A
B
C
E
F
D