775
Maintenance
Headlamp (bulb type) -high/low
1. Open the hood.
2. Remove the front cover(1) and
headlamp assembly nuts(2).
3. Remove the headlamp assembly
from the body of the vehicle
4. Remove the headlamp bulb cover
by turning it counterclockwise.
5. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
6. Remove the bulb by pulling it out.
7. Inset a new bulb by inserting it into
the socket.
8. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
9. Install the headlamp bulb cover by
turning it clockwise.
WARNING -
HID Headlamp low beam
(if equipped)
Do not attempt to replace or
inspect the low beam (XENON
bulb) due to electric shock dan-
ger. If the light bulb does not
operate, have your vehicle
checked by an authorized Kia
dealer.
OYP074068N
OYP074069N
OYP074055N
High lamp
Low lamp
To Next Page
Loading...
