SEDONA FEATURES & FUNCTIONS GUIDE
34
*IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
These illustrations are for demonstration purposes
only. Actual features on vehicle may vary.
These illustrations are for demonstration
purposes only. Actual features on vehicle
may vary.
Front Seat Headrest Adjustment
†10
To raise headrest: Pull headrest up.
To lower headrest: Press lock
A
, then press the headrest down.
Driver Position Memory System*
The integrated system stores into memory the position of the Driver’s Seat and
the Outside Rearview Mirrors.
To store positions into memory, first place the Gear Shift into P (Park) while the
Engine Start/Stop button* is in the ON position. Then:
1. Adjust the Driver’s Seat and the Outside Rearview Mirrors
2. Press the SET button
B
on the control panel. System will beep once
3. Press one of the memory buttons
C
within 5 seconds. The system will beep
twice when memory has been stored
Easy Access Function*
• The system will automatically move the driver's seat forward when the
ignition or the Engine Start/Stop button is pressed to ON or the ACC position
• The system will automatically move the driver's seat rearward when
the ignition or the Engine Start/Stop button is pressed to OFF
• To activate or deactivate the Easy Access Function, go to User
Settings in the LCD Instrument Cluster modes
(Buttons located on Driver's Door Panel)
B
C
A
REMINDER: Do not operate the vehicle with the
headrests removed. Headrests can provide critical
neck and head support in an accident.
REMINDER: Do not attempt to operate the driver
position memory system while the vehicle is moving.
This could result in loss of control of the vehicle.
SEATING
To Next Page
Loading...
