Kia SEDONA 2020 - LDW Operation

Driving your vehicle
1005
LDW Operation
To activate/deactivate the LDW:
With the ignition switch in the ON
position, press the LDW button locat-
ed on the instrument panel on the
lower left hand side of the driver.
The indicator in the cluster display
will initially illuminate white.
If the indicator (white) was activated
in the previous ignition cycle, the
system turns on automatically.
If you press the LDW button again,
the indicator on the cluster display
will go off.
The color of indicator will change
depend on the condition of LDW.
- White : Sensor does not detect the
lane marker or vehicle speed is
less than 40 mph (64 km/h).
- Green : Sensor detects the lane
marker.
If the vehicle leaves the lane when
the LDW operates and vehicle speed
exceeds 40 mph (64 km/h), the
warning is issued as follows:
OYP058234N
OYP058235N
OYP058234N
■ When the sensor detects the lane line
■ When the sensor doesn’t detect the lane line