Features of your vehicle
1724
Interior features
3rd row (if equipped)
Plug the cable into the USB port, and
charging will begin.
The USB car charger is available with
either the ACC state on or the ignition
on. We recommend you connect the
USB port and digital devices with the
engine running. See the display screen
of the device to check its charging pro
-
cess completion. Your smartphone or
table PC could get heated up while
charging. This is no reason to worry, as it
doesn't impact life or functions of the
device. For the safety reason, charging
can be stopped if the battery gets
heated up to a certain point of tempera
-
ture that the devices can be negatively
affected. Charging some digital devices
is not available or requires special dedi
-
cated adapters if their charging methods
don't fit the way the USB car charger
works. Quick Charge 2.0 is available on
the smart phone or the table PC
equipped with fast charging capabilities.
The applicable is as follows: (https://
www.qualcomm.com/documents/quick-
charge-device-list)
The smart phone or PC tablet without
fast charging is charged at a regular
speed.
Rated output:
僅 Digital devices with fast charging:
- 9.0 V, 1.67 A
僅 Digital devices with normal charging:
- 5.0 V, 2.1 A
僅 Use the USB car charger with the igni
-
tion on. Otherwise, Vehicle battery
can be discharged.
僅 Use the official USB cable of the man
-
ufacturer of the digital device to be
charged.
僅 Make sure that any foreign object,
drinks, and water do not come into
contact with the USB car charger.
Water or foreign object can damage
the USB charger.
僅 Do not use the device those current
consumption exceeds 2.1 A.
僅 If the charger is connected incorrectly,
it can cause serious damage on the
devices. Please note that damages
due to incorrect usage are not cov
-
ered by warranty service.
To Next Page
Loading...
