47
5
5
Driving your vehicle Trailer towing
the lights and trailer brakes are still
working.
Following distance
Stay at least twice as far behind the
vehicle ahead as you would when driv
-
ing your vehicle without a trailer. This
can help you avoid situations that
require heavy braking and sudden turns.
Passing
You'll need more passing distance up
ahead when you're towing a trailer. And,
because of the increased vehicle length,
you'll need to go much farther beyond
the passed vehicle before you can return
to your lane.
Backing up
Hold the bottom of the steering wheel
with one hand. Then, to move the trailer
to the left, just move your hand to the
left. To move the trailer to the right,
move your hand to the right. Always
back up slowly and, if possible, have
someone guide you.
Making turns
When you're turning with a trailer, make
wider turns than normal. Do this so your
trailer won't strike soft shoulders, curbs,
road signs, trees, or other objects. Avoid
jerky or sudden maneuvers. Signal well
in advance.
Turn signals when towing a
trailer
When you tow a trailer, your vehicle has
to have a different turn signal flasher
and extra wiring. The green arrows on
your instrument panel will flash when
-
ever you signal a turn or lane change.
Properly connected, the trailer lights will
also flash to alert other drivers you're
about to turn, change lanes, or stop.
When towing a trailer, the green arrows
on your instrument panel will flash for
turns even if the bulbs on the trailer are
burned out. Thus, you may think drivers
behind you are seeing your signals
when, in fact, they are not. It's important
to check occasionally to be sure the
trailer bulbs are still working. You must
also check the lights every time you dis
-
connect and then reconnect the wires.
Do not connect a trailer lighting system
directly to your vehicle's lighting system.
Use only an approved trailer wiring har
-
ness.
Have yourself assisted by a professional
workshop in installing the wiring har
-
ness.
Visit an authorized Kia dealer.
Failure to use an approved trailer wiring
harness could result in damage to the
vehicle electrical system and/or personal
injury.
Detection of trailer light connec
-
tion
This functionality is only given with gen
-
uine accessories (tow bar and wiring
harness) that recognize when a trailer is
connected and consequently inform the
vehicle systems. Trailer recognition
works as follows: when a trailer socket is
plugged in, either the brake pedal shall
be pushed or turn signal lamps acti
-
vated; the electronic control unit will
then detect the trailer because of the
power consumption by the trailer light
-
To Next Page
Loading...
