Driver assistance system
206
Forward Collision-Avoidance Assist (FCA) (Sensor fusion)
僅 If a pedestrian or cyclist is detected in
front, the function will operate when
your vehicle speed is between
approximately 6 ~ 112 mph (6 ~ 53
mph).
僅 If 'Active Assist' is selected, braking
may be assisted.
Emergency braking
僅 To warn the driver that emergency
braking will be assisted, the 'Emer
-
gency Braking' warning message will
appear on the cluster and an audible
warning will sound.
僅 If a vehicle is detected in front, the
function will operate when your vehi
-
cle speed is between approximately
10 ~ 85 km/h (6 ~ 47 mph).
僅 If a pedestrian or cyclist is detected in
front, the function will operate when
your vehicle speed is between
approximately 10 ~ 65 km/h (6 ~ 40
mph).
僅 In emergency braking situation, brak
-
ing is assisted with strong braking
power by the function to help prevent
collision with the vehicle, pedestrian
or cyclist ahead.
Stopping vehicle and ending
brake control
僅 When the vehicle is stopped due to
emergency braking, the 'Drive care
-
fully' warning message will appear on
the cluster.
For your safety, the driver should
depress the brake pedal immediately
and check the surroundings.
僅 Brake control will end after the vehicle
is stopped by emergency braking for
approximately 2 seconds.
Junction Turning function (if
equipped)
Function warning and control
Junction Turning function will help warn
and control the vehicle depending on
the collision level: 'Collision Warning',
'Emergency Braking' and 'Stopping vehi
-
cle and ending brake control'.
To Next Page
Loading...
