Driver assistance system
386
Blind-Spot Collision-Avoidance Assist (BCA)
Rear corner radar
Refer to the picture above for the
detailed location of the detecting sen
-
sors.
Take the following precautions to main
-
tain optimal performance of the detect
-
ing sensor:
僅 Never disassemble the rear corner
radar or radar assembly, or apply any
impact on it.
僅 If there is impact on the rear corner
radar or near the radar, even though
the warning message does not appear
on the cluster, Blind-Spot Collision-
Avoidance Assist may not operate
properly. Have the function be
inspected by an authorized Kia dealer.
僅 If the rear corner radars have been
replaced or repaired, Have the vehicle
be inspected by an authorized Kia
dealer.
僅 The genuine Kia rear bumpers which
the Rear corner radar sensors are
mounted are parts with quality and
performance ensured. If arbitrarily
applying paint on or changing the
bumper, the Blind-Spot Collision-
Avoidance Assist may not function
properly. Use only Kia Genuine Parts
or those of an equivalent standard
with proven quality and performance
to repair or replace the bumper.
僅 Do not apply license plate frame or
objects, such as a bumper sticker, film
or a bumper guard near the rear cor
-
ner radar.
僅 The function may not work properly if
the bumper has been replaced, or the
surroundings of the rear corner radar
has been damaged or paint has been
applied.
僅 If a trailer, carrier, etc. is installed, it
may adversely affect the performance
of the rear corner radar or the func
-
tion may not operate.
For more details on the precautions of
the front view camera, refer to "Forward
Collision-Avoidance Assist (FCA) (Sen
-
sor fusion) (if equipped)" on page 6-16.
Blind-Spot Collision-Avoidance
Assist settings
Blind-Spot Safety
With the engine on, select or deselect
'Driver Assistance → Blind-Spot Safety'
from the Settings menu to set whether
or not to use each function.
To Next Page
Loading...
