Kia Sedona 2024 - Page 377

39
6
6
Driver assistance system Blind-Spot Collision-Avoidance Assist (BCA)
僅 If 'Active Assist' is selected, the func -
tion will warn the driver with a warn -
ing message, an audible warning and
braking assist will be applied depend
-
ing on the collision risk levels.
僅 If 'Warning Only' is selected, the func
-
tion will warn the driver with a warn -
ing message and an audible warning
depending on the collision risk levels.
Braking will not be assisted.
僅 If 'Off' is selected, the function will
turn off.
When the engine is restarted with the
function off, the 'Blind-Spot Safety Sys -
tem is Off' message will appear on the
cluster.
If you change the setting from 'Off' to
'Active Assist' or 'Warning Only', the
warning light on the outside rearview
mirror will blink for 3 seconds.
In addition, if the engine is turned on,
when the function is set to 'Active Assist'
or 'Warning Only', the warning light on
the outside rearview mirror will blink for
3 seconds.
WARNING
僅 'If 'Warning Only' is selected, braking
is not assisted.
僅 If 'Off' is selected, the driver should
always be aware of the surroundings
and drive safely.
NOTICE
If the engine is restarted, Blind-Spot Col -
lision-Avoidance Assist will maintain the
last setting.
Warning Timing
With the engine on, select 'Driver Assis -
tance → Warning Timing' from the Set -
tings menu to change the initial warning
activation time for Blind-Spot Collision-
Avoidance Assist.
When the vehicle is first delivered, Warn
-
ing Timing is set to 'Normal. If you
change the Warning Timing, the warning
time of other Driver Assistance systems
may change.
OMQ4050293L
OMQ4AH050334