19
3
3
Safety features of your vehicle Seat
Removing the seat (2nd row seat)
1. Insert the seat belt buckle in the
pocket between the rear seatback
and cushion.
2. Lower the headrest to the lowest posi
-
tion.
3. Slide the seat to the farthest forward.
4. Fold the seat back by pulling up the
reclining lever or strap.
5. Pull the removal lever or strap and lift
the rear portion of the seat cushion.
2nd row outboard seat
2nd row center seat
6. Remove the entire seat from the floor.
Installing the seat (2nd row seat)
1. Put the front hook (1) on the front
install guide (A) that inside rail on the
floor.
To Next Page
Loading...
