Safety features of your vehicle
203
Seat
2. Insert two front hooks into the front
strikers (B).
3. Lift the rear portion of the seat cush
-
ion then push down firmly to lock the
catches into the rear strikers (C) until
an audible "click" is heard.
4. Make sure the green mark on the rear
seat cushion frame is visible and the
catches are locked in position by mov
-
ing the seat forward and backward or
lifting the front portion of the seat. If
the green mark is invisible and the
seat moves, it is not locked properly.
5. Pull up the seatback reclining lever or
strap.
6. Lift and push the seatback backward
firmly until it clicks into place. Make
sure the seatback is locked in place.
7. Return the seat belt to the proper
position.
Installing or removing the seat
僅 Do not install or remove the 2nd row
seat if there are occupants in the 3rd
row seats, as this may injure occu
-
pants.
僅 Fold seatback before installing the
tumble seat.
If the rear catches of the seat are locked
into the rear anchors (2) while the front
catches are not locked into the front
anchors (1), do the followings to release
the rear catches from the rear anchors.
To Next Page
Loading...
