83
6
6
Driver assistance system Smart Cruise Control (SCC)
Smart Cruise Control conditions
not satisfied
If the Driving Assist button, + switch, -
switch or ( ) switch is operated when
the function's operating conditions are
not satisfied, the 'Smart Cruise Control
conditions not met' (or SCC (Smart
Cruise Ctrl. conditions not met') will
appear on the cluster, and an audible
warning will sound.
In traffic situation
In traffic, your vehicle will stop if the
vehicle ahead of you stops. Also, if the
vehicle ahead of you starts moving, your
vehicle will start as well.
In addition, after the vehicle has stopped
and a certain time have passed, the 'Use
switch or pedal to accelerate' message
will appear on the cluster. Depress the
accelerator pedal or operate the +
switch, - switch or ( ) switch to start
driving.
While the message is displayed on the
cluster, if there is no vehicle in front or
the vehicle is far away from you, and the
+ switch, â switch or ( ) switch is
operated, Smart Cruise Control will auto
-
matically cancel and the EPB will be
applied. However, if the accelerator
pedal is depressed, EPB will not be
applied even though the function is can
-
celed. Always pay attention to the road
condition ahead.
Warning road conditions ahead
In the following situation, the 'Watch for
surrounding vehicles' warning message
will appear on the cluster, and an audi
-
ble warning will sound to warn the driver
of road conditions ahead.
ċ
The vehicle in front disappears when
Smart Cruise Control is maintaining
the distance with the vehicle ahead
while driving below a certain speed.
To Next Page
Loading...
