Driver assistance system
1146
360° camera monitoring system
僅 Press the Parking/View button (1) to
turn on 360° camera monitoring sys
-
tem. Press the button again to turn off
the function.
僅 Other view modes can be selected by
touching the view icons (2) on the
360° camera monitoring system
screen.
僅 When one of the infotainment system
button (3) is pressed without the gear
in R (Reverse), 360° camera monitor
-
ing system will turn off.
Front view
The front image is displayed on the
screen when the gear is in N (Neutral) or
D (Drive) to assist in parking. The front
view has a top view/front view/side view.
Operating conditions
僅 The front view will change to the view
mode that was last used when the
gear is changed from R (Reverse) to N
(Neutral) or D (Drive).
僅Front view function will operate when
the following conditions are satisfied:
- While the infotainment system
screen is being displayed, press the
Parking/View button (1) briefly
when the gear is in D (Drive) or N
(Neutral) and vehicle speed is
below 10 km/h (6 mph).
僅 Surround View Monitor Auto On func
-
tion will operate when the following
conditions are satisfied:
- If 'Driver Assistance → Parking
Safety → Surround View Monitor
Auto On' is selected in the Settings
menu and Parking Distance Warn
-
ing warns the driver when the gear
is in P (Parking), the front view
screen is displayed.
Off conditions
僅 Press the Parking/View button (1)
again, the image will turn off.
僅 When vehicle speed is above 10 km/h
(6 mph) with the gear in D (Drive),
Surround View Monitor will turn off
and the screen will change back to the
previous infotainment system screen.
Although you drive below 10 km/h (6
mph) again, 360° camera monitoring
system will not turn on.
僅 Press one of the infotainment system
button (3), the screen will change to
the infotainment system screen.
僅 Shift the gear to P (Park), the image
will turn off.
Rear view
The rear image is displayed on the
screen when the gear is in R (Revers) or
P (Park) to assist in parking. The rear
view has a top view/rear view/side view.
Operating conditions
僅 Shift the gear to R (Reverse), the
image will appear on the screen.
僅 Press the Parking/View button (1)
while the gear is in P (Park), the image
will appear on the screen.
Off conditions
僅 The image cannot be turned off when
the gear is in R (Reverse).
僅 Shift the gear from R (Reverse) to P
(Park), the image will turn off.
僅 Press the Parking/View button (1)
again while the gear is in P (Park) with
the image on the screen.
To Next Page
Loading...
