117
6
6
Driver assistance system Rear Cross-Traffic Collision-Avoidance Assist (RCCA)
turn on Rear Cross-Traffic Collision-
Avoidance Assist and deselect to turn off
the function.
When the engine is restarted, Rear
Cross-Traffic Collision-Avoidance Assist
will always turn on. However, if 'Off' is
selected after the engine is restarted, the
driver should always be aware of the
surroundings and drive safely.
Settings for Rear Cross-Traffic Collision-
Avoidance Assist include Rear Cross-
Traffic Collision Warning and Rear
Cross-Traffic Collision-Avoidance Assist.
Warning Timing
With the engine on, select 'Driver Assis
-
tance → Warning Timing' from the Set
-
tings menu to change the initial warning
activation time for Rear Cross-Traffic
Collision-Avoidance Assist.
When the vehicle is first delivered, Warn
-
ing Timing is set to 'Normal'. If you
change the Warning Timing, the warning
time of other Driver Assistance systems
may change.
Warning Methods
You can adjust the Warning Methods
with the ignition switch or ENGINE
START/ STOP button in the ON position.
僅 Warning Volume : Select 'User Set
-
tings → Driver Assistance → Warning
Volume' on the LCD display or 'Set
-
tings → Vehicle → Driver Assistance
→ Warning Methods → Warning vol
-
ume' on the Infotainment system.
Even if '0' or 'Off' is selected, the func
-
tion's Warning Volume will not turn off
but the volume will sound as '1' or
'Low'
僅 Steering Wheel Vibration Warning:
Select 'User Settings → Driver Assis
-
tance → Haptic warning' on the LCD
display or 'Settings → Vehicle →
Driver Assistance → Warning Methods
To Next Page
Loading...
